Fast delivery all over india
Sapphire Nitro+ RX 7900 XTX Vapor-X OC 24GB Graphics Card
RAM & SSD prices are highly volatile. Please confirm stock and price before placing your order.
Original price was: ₹145,500.00.₹107,900.00Current price is: ₹107,900.00. (Inclusive of GST)
- GPU: Boost Clock: Up to 2680 MHz
- GPU: Game Clock: Up to 2510 MHz
- Memory: 24GB/384 bit DDR6. 20 Gbps Effective
- Stream Processors: 6144
- RDNA™ 3 Architecture
- Ray Accelerator: 96
In stock
Sapphire Nitro+ RX 7900 XTX Vapor-X OC 24GB Graphics Card
Sapphire Nitro+ Radeon RX 7900 XTX Vapor-X is powered by AMD RDNA Chip let Technology. The Ultra High Performance Conductive Polymer Aluminum Capacitor has a small PCB foot print but high volumetric capacitance that makes 20-phase power possible on the RX
- GPU: Boost Clock: Up to 2680 MHz
- GPU: Game Clock: Up to 2510 MHz
- Memory: 24GB/384 bit DDR6. 20 Gbps Effective
- Stream Processors: 6144
- RDNA™ 3 Architecture
- Ray Accelerator: 96
AMD RDNA™ 3 Architecture
- 24GB of GDDR6 memory
- AMD Radiance Display™ Engine
- DisplayPort™ 2.1
- AMD FidelityFX™ Super Resolution
- AMD Radeon Super Resolution
- 4K and Beyond
Software BIOS Switch
SAPPHIRE NITRO+ Graphics Cards
Backplate
Provides rigidity and helps cool your card by increasing heat dissipation.
Engineered
ARGB
Personalize the look of your NITRO + card with its built-in ARGB.
Outputs
Choose from HDMI and DP slots for a maximum of 4 outputs
Cooling
Innovative cooling technologies to ensure optimal performance and airflow.
Vapor-X Cooling
WAVE Fin Design & V-Shape Fin Design for GPU cooling
The WAVE Fin Design reduces friction when the wind goes into the fin module resulting in a reduction of the wind cut noise.
The V-shape fin design on top of the GPU accelerates and centralizes the air flow around the GPU to dissipate heat efficiently.
Die Casted Aluminum-Magnesium Alloy Frame & Frontplate Heatsink
The Die Casted Aluminum-Magnesium Alloy Frame enveloping the sides of the PCB help to strengthen the structural stiffness of the shroud to create a strong, scratch resistant and high quality finish that elevates the aesthetic and strength of the graphics card. Overlaying the entire PCB, the die casted Frontplate Heatsink cools the VRM, Memory and Chokes resulting in superior heat dissipation for top-notch airflow and cooling performance.
Digital Power Design
Ultra High Performance Conductive Polymer Aluminum Capacitor
High TG Copper PCB
The GPU is mounted on to the high-density 14 layer 2oz Copper and high TG PCB to match the rapid speed, high current and increased power requirement of the GPU and memory to guarantee high stability of the PCB during operation.
Tough Metal Backplate
Dedicated VRM Cooling
Dedicated VRM cooling module to create optimal heat dissipation for peak airflow and cooling performance.
Angular Velocity Fan Blade
The Angular Velocity Fan Blade provides a double layer of downward air pressure which alongside the air pressure on the outer ring of the Axial fan, results in up to 44% more downward air pressure and up to 19% more airflow for a quieter and cooler operation when compared to the previous generations.
Optimized Composite Heat pipe
The composite heat pipes are fine-tuned for each individual cooling design with optimal heat flow, efficiently and evenly spreading out the heat to the entire cooling module.
Assistive System Fan Control
When the temperature of the GPU increases, the graphics card fans speed up accordingly. To further help with cooling and heat dissipation, the Assistive System Fan Control feature in SAPPHIRE’s TriXX software controls the speed of a system fan to automatically increase at the same time as the graphics card fans, this assists in expelling the heated air from the entire system faster.
Fuse Protection
In order to protect your card, the SAPPHIRE cards have fuse protection built into the circuit of the external PCI-E power connector to keep the components safe.
OC BIOS
This BIOS has been engineered to the maximum TGP setting for maximized gaming performance
Dual BIOS
Graphics Card Supporter
Bundled with a graphics card supporter to keep the graphics card in place on the PCIe Slot.
Dual ARGB Light Bar
With tasteful shroud design augmented by ARGB LEDs, you can change the colors of the LED, for a customized design. This can be controlled via TriXX software. Choose from different modes including Fan Speed Mode, PCB Temperature Mode or the colourful rainbow mode or turn off the LEDs.
External ARGB Control Sync
Enable the external synchronization of RGB LEDs between the graphics card and the motherboard using the 3-pin header in the tail. Gamers can then choose if the graphics card performs the RGB LED effects independently or if the motherboard acquires control.
Fan Quick Connect
If there’s a fan problem, you don’t have to return the entire card. SAPPHIRE or our channel partners will send out a replacement fan directly to you! That means they’re easy to remove, clean and replace, with just one screw holding them securely in place.
Two-Ball Bearing
These feature Dual Ball bearing fans, which have an approximately 85% longer lifespan than sleeve bearings in our tests. The improvements to the fan blades means the solution is up to 10% quieter than the previous generation.
TRI-X COOLING TECHNOLOGY
An innovative mixture of Robust VRM Cooling and independent memory thermal modules work in tandem to remove heat efficiently and effectively across all sections
Tunneled fins increase convection airflow and ensure wind continuously flows through the cooling and fan system.
Heat is dissipated by a trio of large efficient fans running anticlockwise to maximize airflow.
AMD RDNA™ 3
| GPU | AMD Radeon™ RX 7700 XT Graphics Card |
| 5nm GPU | |
| AMD RDNA™ 3 Architecture | |
| Stream Processors | 3456 |
| Compute Units | 54 CU (with RT+AI Accelerators) |
| Infinity Cache | 48MB |
| Ray Accelerators | 54 |
| Memory Size/Bus | 12GB/192 bit GDDR6 |
| Displays | Maximum 4 Displays |
| Resolution | HDMI™: 7680×4320 |
| DisplayPort 2.1: 7680×4320 | |
| Interface | PCI-Express 4.0 x16 |
| Output | 2x HDMI |
| 2x DisplayPort | |
| BIOS Support | UEFI |
| Game Index | 1440P |
| Sapphire Features | Digital Power Design |
| Ultra High Performance Conductive Polymer Aluminum Capacitors | |
| Fuse Protection | |
| High TG Copper PCB | |
| Optimized Composite Heatpipe | |
| Dual-X Cooling Technology | |
| Intelligent Fan Control | |
| Precision Fan Control | |
| Metal Backplate | |
| Angular Velocity Fan Blade | |
| Dual-Ball Bearing Fans | |
| TriXX Supported | |
| TriXX Boost | |
| AMD Features | AMD RDNA™ 3 Architecture |
| 54 AMD RDNA™ 3 Compute Units (with RT+AI Accelerators) | |
| 48MB AMD Infinity Cache™ Technology | |
| DisplayPort™ 2.1Support | |
| AMD Radiance Display™ Engine | |
| 12GB GDDR6 on 192-Bit Memory Bus | |
| PCI® Express 4.0 ready | |
| AMD FidelityFX™ Super Resolution technology | |
| Microsoft® DirectX® 12 Ultimate Support | |
| Microsoft® DirectStorage Support | |
| Vulkan® Optimized | |
| AMD Smart Technologies | |
| AMD Software: Adrenalin Edition™ | |
| AMD Noise Suppression | |
| AMD Privacy View | |
| AMD Radeon™ Super Resolution technology | |
| AMD Link | |
| AMD FreeSync™ technology | |
| Cooling | 2 Fans |
| Form Factor | 2.5 slot, ATX |
| Dimension: 280(L)X 128.75(W)X 52.57 (H)mm | |
| Power Consumption | 230W Total Board Power |
| OS | Linux®, Windows® 10, and Windows 11. 64-bit operating system required |
| System Requirement | Minimum 700 Watt Power Supply |
| 2 x 8-pin Power Connector. | |
| PCI Express® based PC is required with one X16 lane graphics slot available on the motherboard. | |
| Minimum 8GB of system memory. 16GB recommended. |
| Weight | 2 kg |
|---|---|
| Product Type | Gaming |
| color | Silver |
| Brand | Sapphire |
| GPU Chipset | AMD Radeon |
| GPU Memory Size | 24GB |
| GPU Series | Radeon RX 7000 |
| Max GPU Boost Clock | 2680 MHz |
| Memory Bus | 384 bit |
| Memory Series | GDDR6 |
| Warranty | 3 Years |
| EAN Code | 4895106293328 |
Reviews
There are no reviews yet