Fast delivery all over india
Audio-Technica AT-VM95E/H Headshell & Cartridge Combo Kit
Original price was: ₹7,730.00.₹6,810.00Current price is: ₹6,810.00. (Inclusive of GST)
In stock
- Pre-mounted cartridge and headshell combo for quick and convenient turntable installation.
- Features the AT-VM95E Dual Moving Magnet cartridge with a 0.3 × 0.7 mil elliptical stylus.
- Aluminum cantilever provides accurate and stable groove tracking.
- Delivers 4.0 mV output with a 20 Hz–22 kHz frequency response.
- Includes the AT-HS6BK universal 1/2-inch headshell for compatible turntables.
- Durable, low-resonance cartridge housing helps maintain consistent playback.
- Compatible with the complete AT-VMN95 replacement stylus range.
- Recommended tracking force: 2.0 g (1.8–2.2 g range).
- Total cartridge and headshell weight: 15.5 g.
- Ideal for Hi-Fi vinyl listening, turntable upgrades, and everyday record playback.
Audio-Technica AT-VM95E/H Headshell & Cartridge Combo Kit
The Audio-Technica AT-VM95E/H Headshell & Cartridge Combo Kit combines the AT-VM95E/H dual moving magnet stereo cartridge with a pre-mounted AT-HS6 universal 1/2-inch headshell, providing a convenient and ready-to-install solution for compatible turntables. Designed for reliable vinyl playback, the cartridge features a 0.6 mil bonded conical stylus and an aluminum cantilever for stable tracking and consistent sound reproduction.
The AT-VM95E/H uses Audio-Technica’s dual moving magnet design with specially wound coils that provide a 4.0 mV output voltage, along with a frequency response of 20 Hz to 20 kHz. Its durable, low-resonance polymer housing helps maintain stable cartridge performance while the conical stylus is designed to provide dependable groove tracking for everyday vinyl listening.
A major advantage of the AT-VM95E/H is its pre-mounted configuration. The cartridge is already installed on the AT-HS6 headshell, making setup simpler and reducing the alignment work normally required when installing a cartridge separately. The universal 1/2-inch headshell is compatible with turntables and tonearms designed for standard 4-pin cartridge connections.
The cartridge body incorporates threaded mounting inserts, allowing it to be secured to the headshell using two screws without requiring separate nuts or washers. The AT-VM95E/H is also compatible with the complete AT-VMN95 replacement stylus range, allowing users to upgrade or replace the stylus while retaining the same cartridge body.
With a recommended tracking force of 2.0 g within a range of 1.8–2.2 g, 18 dB channel separation, and a recommended load impedance of 47 kΩ, the AT-VM95E/H is designed to deliver balanced and dependable stereo vinyl playback. Its combination of straightforward installation, replaceable stylus design, and universal headshell compatibility makes it a practical choice for turntable owners looking to replace or upgrade their cartridge setup.
| Specification | Details |
|---|---|
| Brand | Audio-Technica |
| Model | AT-VM95E/H |
| Product Type | Headshell & Cartridge Combo Kit |
| Cartridge Type | VM Stereo Dual Moving Magnet |
| Headshell | AT-HS6BK Universal Headshell |
| Mounting | Half-Inch (1/2-inch) |
| Stylus Shape | 0.3 × 0.7 mil Elliptical |
| Stylus Construction | Bonded Round Shank |
| Cantilever | Aluminum Pipe |
| Frequency Response | 20–22,000 Hz |
| Channel Separation | 20 dB at 1 kHz |
| Channel Balance | 2.0 dB at 1 kHz |
| Output Voltage | 4.0 mV at 1 kHz, 5 cm/sec |
| Tracking Force | 1.8–2.2 g (2.0 g standard) |
| Vertical Tracking Angle | 23° |
| Recommended Load Impedance | 47,000 ohms |
| Recommended Load Capacitance | 100–200 pF |
| Coil Impedance | 3.3 kΩ at 1 kHz |
| DC Resistance | 485 ohms |
| Coil Inductance | 550 mH at 1 kHz |
| Static Compliance | 17 × 10⁻⁶ cm/dyne |
| Dynamic Compliance | 7 × 10⁻⁶ cm/dyne at 100 Hz |
| Cartridge Weight | 6.1 g |
| Cartridge + Headshell Weight | 15.5 g |
| Dimensions (Cartridge) | H 17.2 × W 18.9 × D 28.3 mm |
| Dimensions (Cartridge + Headshell) | H 21.2 × W 21.4 × D 62.4 mm |
| Replacement Stylus | AT-VMN95E |
| Compatible Stylus Range | AT-VMN95 Series |
| Coil Wire | T.P. Copper |
| Included Accessories | 11 mm screws ×2, 8 mm screws ×2, washers ×2 |
| Weight | 1 kg |
|---|---|
| Brand | Audio Technica |
| Dimensions | H 21.2 × W 21.4 × D 62.4 mm |
| Product Type | CARTRIDGE WITH HEADSHELL |
| EAN Code | 4961310146528 |
Reviews
There are no reviews yet